News – Peopoly

Vulcanized Rubber Process with Nex resin

by Shu Peng January 10, 2019

*This article only applies to Nex Grey and Flesh resins Many model makers love the look for Nex Grey and Flesh resin for its smooth finish, premium...

Moai work flow - Print Orientation

by Shu Peng November 20, 2018

When setting up an SLA print, below these are the steps you have to consider. Here is the workflow: 1 Print Orientation 2 Hollowing 3 Offset from z...

Asura 2.1.1 software by Peopoly, improve support functions, updated adjustment algorithm

by Shu Peng July 08, 2018

Asura is a software that simplifies the process of preparing for resin-based 3D printing. We created it to streamline Moai workflow with new users...

What's next for Moai

by Shu Peng April 24, 2018

It has been a year since Moai Kickstarter ended. We like to take this chance to thank you and tell you what is coming up next for Moai Hardware up...

The easy and fast way to add support for printing on Moai

by Shu Peng January 30, 2018

For those who are new to SLA printing, adding support is likely the toughest learning curve. Here is a quick tutorial for those who need a more au...

How to manually create cross-linked supports

by Shu Peng January 29, 2018

Many Moai users like to use B9Creator or Creation Workshop to create support for their models. However, the biggest complaint about supports made ...

How to print Moai resin on Formlabs Form2

by Shu Peng November 05, 2017

We often received inquiries how to print Moai for other printers, and the most frequent request is for Form2. Some of the users reported excellent...

Moai resin - explained

by Shu Peng October 31, 2017

When we started developing Moai, we knew some of our future users would be first time SLA printer users. Thus, we wanted a resin that gives good re...

How to customize Cura build platform for Moai

by Shu Peng October 12, 2017

One of the hardest parts about SLA printing is understanding how to work with peel force and where the object is placed in the vat vs. in the Cura ...

Comparison of support generation software for resin 3D printing

by Shu Peng October 09, 2017

There are lots software tools for setting up your model before printing. In this post, we will cover freely available ones that are for prepping m...

Recommended cleaning method for Moai resin

by Shu Peng October 06, 2017

Post cleaning and curing are as important to final results as the actual printing part itself. Following is the recommended cleaning approach recom...

Moai Firmware 1.14

by Shu Peng September 30, 2017

Moai firmware version 1.14 is an important update for the system. Key changes: 1. X / Y Size range increase from 100 to 400. So what was 90 then is...